Category Archives: 600-601 IMINS試験

16 4月

600-601 IMINS Managing Industrial Networks with Cisco Networking Technologiesオンラインテスト試験

600-601 IMINSシスコネットワーキング技術と産業ネットワークの管理として知られる。関連した認定シスコネットワークスペシャリストです。本当のシスコ600-601試験では55 – 65の質問があり、受験者は試験を完了するために75分がかかります。利用可能な言語は英語である。候補は、ピアソンvue試験センターでシスコ600-601試験に登録することができます。
Cisco 600-601試験のipネットワークのosi層の候補者の知識だけでなく、ルータやスイッチなどのネットワーク機器として、配線のアプローチを駆動する、などの特定の産業機器のplcは、センサ、および変電所設備の一過性のような関連した工業標準とモデル、パーデュー大学のモデルと環境基準と工業地帯における種々の安全プロトコルが重要である。

Cisco 600-601 IMINS無料オンラインテスト、こちらをクリックする

それはCisco 600-601試験の話題を知っている候補のために役に立ちます。

15% 1.0 Install, Replace, and/or Remove an End-Device

1.1 Demonstrate knowledge of different industrial end-point devices and the interconnections for those devices to perform appropriately in an industrial setting to incorporate elements of bandwidth, real-time, precision, etc.
1.2 Given a config script for a topology determine the appropriate location for the installation of the industrial ruggedized end-point device and how that device will interact with other elements
1.3 Ensure proper industrial network operation of a given end-device following replacement by verifying that industrial ruggedized
elements (ports, IP address, connectivity, subnet mask, default gateway) are appropriately configured/connected.
1.4 Demonstrate an understanding of safe physical installation of various industrial ruggedized end-devices within an industrial setting following a terminal block diagram

23% 2.0 Install, Replace, and/or Remove an Infrastructure Device

2.1 Demonstrate a knowledge of how different industrial application/network protocols operate within the network topology (Ethernet/IP, 61850, etc.)
2.2 Demonstrate familiarity with basic CLI/GUI configuration within an industrial network by accessing, configuring, saving, validating (ports, IP address, connectivity, subnet mask, default gateway) and exiting a network device
2.3 Demonstrate understanding of safe physical installation of various industrial ruggedized network devices within an industrial
setting, (e.g. following a schematic such as a terminal block diagram, and the interdependencies of the network infrastructure devices.)
2.4 Demonstrate knowledge of different industrial network infrastructure devices, their places in the industrial network, and the networking/device characteristics such as QoS, precise timing, industrial topologies, network resiliency, ruggedization, bandwidth, etc
2.5 Illustrate understanding of the interconnections for the full network within a validation of the entire industrial network connectivity and that it is aligned with the provided design diagram (correct number of devices and/or IP addresses, cables are properly labelled and connected to the proper places, usage of appropriate icons) to include ensuring that configuration files are up to date and available
2.6 Illustrate an understanding of the safety and security risks (company or industry, e.g. Purdue model) for a given industrial infrastructure device and apply the appropriate steps to secure it (e.g. are unused ports turned off, telnet versus SSH, https versus http, network segmentation.)

10% 3.0 Install, Replace, and/or Remove Cables (network and/or power)

3.1 Demonstrate the selection of cable channel for an industrial application with appropriate cable and connectors, for example two-pair, four-pair cable, high-flex, high- EMI, unshielded, fiber, and copper
3.2 Demonstrate safe and secure installation, identification, and documentation best practices for various industrial environments
including grounding, bonding, shielding, etc. (for example: TIA1005, TIA568c.0, EN10174, TIA606b, and NEC article 800.)
3.3 Identify the steps and tools for validating the newly installed cabling and connectors (for example: TIA568c.2.)

35% 4.0 Troubleshooting

4.1 Layer 1
4.1.a Identify cable or device issues by visual inspection, test tools, and examining traffic statistics via system logs and/or end devices UIs
4.1.b Characterize the symptoms associated with a duplex mismatch situation
4.2 Layer 2
4.2.a Given a scenario in an industrial setting, troubleshoot a switch port by reviewing the UI, configuration, link lights, and/or looking at counters or packet capture (e.g. multicast, QoS.)
4.2.b Given network symptoms identify the likely errors and the root causes of those errors (e.g. baud rate, network loops, spanning tree.)
4.3 Layer 3
4.3.a Given a scenario in an industrial setting, troubleshoot a networking device by reviewing the UI, configuration, addressing/subnet mask, link lights, and/or looking at counters or packet capture (e.g. routing protocol, QoS, duplicate IP.)
4.3.b Determine if there is layer 3 connectivity using common tools (e.g. trace route, ping, etc.)
4.4 End to End
4.4.a Determine if there is application connectivity and appropriate industrial performance using common tools (e.g. trace route,
ping, telnet, etc.)
4.5 Relevant Networking Issues
4.5.a Identify and collect relevant troubleshooting information for issue reporting/escalation/duplication.
4.5.b Demonstrate appropriate knowledge to proactively identify cyber and physical security incidents
4.5.c Demonstrate an understanding of secure, safe, and non-disruptive methods during industrial network monitoring and diagnosis

17% 5.0 Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices

5.1 Given a scenario, ensure reliable back-ups of current configuration are being made
5.2 Given a scenario, verify that the appropriate firmware is loaded to support the system
5.3 Demonstrate an understanding of the importance of maintaining updated firmware to minimize security holes
5.4 Demonstrate an understanding of appropriate techniques to upload software to a Cisco IOS networking device
5.5 Provided a deployed asset inventory database illustrate an understanding of appropriate methods for updating and/or maintaining the database (hardware, operating system and patch level, which people have access to different systems.)
5.6 Demonstrate an understanding of the conditions that cause deterioration of equipment (cables, devices, etc.) as related to industrial environments
5.7 As part of the change management process identify the relevant documentation artifacts to be maintained for all stakeholders




200-101 ICND2オンラインテスト 300-101 ROUTE オンラインテスト 300-115 SWITCH オンラインテスト 600-601 IMINS オンラインテスト 640-864J DESGN オンラインテスト Building Cisco Service Provider Next-Generation Networks CCIE Routing and Switching認定資格 CCIE Security written CCNA Interconnecting Cisco Networking Devices 1 (ICND1) 日本語版 CCNA Routing and Switching CCNP Collaboration認定資格 CCNP Routing and Switching認定資格 Cisco Cisco Architecture認定資格 Cisco CCDA認定資格 Cisco CCIE Data Center認定資格 Cisco CCIE認定資格 Cisco CCNA Data Center認定資格 Cisco CCNA SP認定資格 Cisco CCNA Voice認定資格 Cisco CCNA認定資格 Cisco CCNP Data Center認定資格 Cisco CCNP Security認定資格 Cisco CCNP Service Provider認定資格 Cisco CCNP SP Operations認定資格 Cisco CCNP Voice認定資格 Cisco CCNP Wireless認定資格 Cisco CCNP認定資格 Cisco IronPort認定資格 Cisco Others認定資格 Cisco Service Provider Mobility CDMA to LTE Specialist認定資格 Cisco Service Provider Mobility UMTS to LTE Specialist認定資格 Cisco Specialist認定資格 Implementing and Maintaining Cisco Technologies Using IOS XR Implementing Cisco Data Center Unified Fabric (DCUFI) Implementing Cisco IP Routing Implementing Cisco IP Switched Networks Implementing Cisco IP Telephony & Video Implementing Cisco Secure Access Solutions Implementing Cisco Secure Mobility Solutions Implementing Cisco TelePresence Video Networking Solutions Exam Implementing Cisco Threat Control Solutions (SITCS) Implementing Cisco Unified Communications Manager Managing Industrial Networks with Cisco Networking Technologies Part 1 v8.0 (CIPT1 v8.0)